Operating Instructions for DAIKIN Ducted Systems

( refer to map above)

1. On / Off Switch
2. On / Off Indicator
3. Heating (Sun Symbol)
4. Cooling (Snowflake Symbol)
5. Fan Only (Fan Symbol)
6. Program Button
7. Timer Button
8. 1 to 72 Hour Timer
9. Temperature Selector
10. Filter Clean Reset Button
11. Fan Speed Selector
12. Cooling / Heating / Fan Only Selector

General Instructions for Use

Summer
Switch on required area switches first, then select Cooling (Snowflake Symbol)
Select summer comfort temperature (24°C)
Switch the air conditioning system on (On / Off Switch)
High fan speed for 2 areas, low fan speed for 1 area
To switch the air conditioning system off, press the On / Off Switch then turn off all area switches

Winter
Switch on required area switches first, then select Heating (Sun Symbol)
Select winter comfort temperature (21°C)
Switch air conditioning system on (On / Off Switch)
High fan speed for 2 areas, low fan speed for 1 area
To switch the air conditioning system off, press the On / Off Switch then turn off all area switches

Fan Only
Switch on required area switches first, then select Fan Only (Fan Symbol)
Switch the air conditioning system on (On / Off Switch)
High fan speed for 2 areas, low fan speed for 1 area
To switch the air conditioning system off, press the On / Off Switch then turn off all area switches

Timer Control
To program run on time, press program button once (system will switch off once set time has expired)
Select 1 to 72 hours with hour timer and press timer button once
To program start time, press program button twice (system will switch on once set time has expired)
Select 1 to 72 hours with hour timer and press timer button once
To cancel either procedure, press timer button once more

Daikin Ducted System

Summer

• Switch on required are switches first, then select Cooling (Snowflake Symbol)
• Select summer comfort temperature (24°C)
• Switch the airconditioning system on (On/Off Switch)
• High fan speed for 2 areas, low fan speed for 1 area
• To switch the air conditioning system off, press the On/Off Switch then turn off all area switches

Winter

• Switch on required area first, then select Heating (Sun Symbol)
• Select winter comfort temperature (21°C)
• Switch airconditioning system on (On/Off Switch)
• High fan speed for 2 areas, low fan speed for 1 area
• To switch the airconditioning system off, press the On/Off Switch then turn off all area switches

Fan Only

• Switch on required area first, then select Fan Only (Fan Symbol)
• Switch airconditioning system on (On/Off Switch)
• High fan speed for 2 areas, low fan speed for 1 area
• To switch the airconditioning system off, press the On/Off Switch then turn off all area switches

Timer Control

• To program run on time, press program button once (system will switch off once set time has expired)
• Select 1 to 72 hours with hour timer and press timer button once
• To program start time, press program button twice (system will switch on once set time has expired)
• Select 1 to 72 hours with hour timer and press timer button once, to cancel either procedure, press timer button once more.
  

General Operating Procedures

• Do turn on your system early when you know that it is going to be very hot or very cold. This will enable the equipment to reach set temperature and maintain it more efficiently.
• Switch on areas required to be cooled / heated before turning on air conditioning unit.
• Switch off areas after air conditioning unit has been turned off.
• Do not leave area switches on unless being used, as this may shorten the lifespan of the zone motor (up to and including 2002).
• Ensure the return air filter and grille is kept clean. Check regularly. A blocked filter may cause a system failure and result in expensive repairs. Should the dirty filter symbol (dripping tap) appear on the control panel, stop the system & clean the filter immediately before turning your air conditioning back on.
• Do not close doors between the operating air outlet and the return air filter to ensure optimum performance of your system.
• Do close doors to areas that are not being air conditioned
• Do close windows in areas being air conditioned. You will still have a percentage of fresh air entering the house as most buildings 'leak' air - we all know about those draughts that are hard to track down.
• You may experiment with temperature settings, if required, using small increments at a time, to achieve personal comfort, but be aware that settings that are 'unreasonable' ie. 17°C on a 37°C day may cause your system to fail. At the very least it will be operating at maximum power usage.
• Do have your system regularly serviced. We recommend every 18 months to 2 years.

Operating Instructions for DAIKIN Split Systems pre 2001

Operation by remote controller

AUTO operation    COOL operation    HEAT operation   1. Select the mode of your choice 2. Adjust the temperature setting UP.......... DOWN... 3. Select the air flow of your choice 4. Press ON/OFF button Then OPERATION indicator lamp lights up. To stop Press ON/OFF button Then OPERATION indicator lamp goes out. Note: Temperature settings are mere guides and there may be variations depending on room size and room shape.

Operating Instructions for DAIKIN Split Systems Current

Operating Instructions for DAIKIN Inverter

1. Signal transmitter:
It sends signals to the indoor unit.2. Display:
It displays the current settings. (In this illustration, each section is shown with all its displays ON for the purpose of explanation.) 3. HOME LEAVE button:
for HOME LEAVE operation.4. POWERFUL button:
for POWERFUL operation. 5. TEMPERATURE adjustment buttons:
It changes the temperature setting.6. ON/OFF button:
Press this button once to start operation. Press once again to stop it.7. MODE selector button:
It selects the operation mode. (AUTO/DRY/COOL/HEAT/FAN)8. SILENT button: for OUTDOOR UNIT
SILENT operation. Only works for multi-connection. 9. FAN setting button:
It selects the air flow rate setting. 10. SWING button:
11. SENSOR button:
For INTELLIGENT EYE operation. 12. ON TIMER button:
13. OFF TIMER button:
14. TIMER SETTING button:
It changes the time setting. 15. TIMER CANCEL button:
It cancels the timer setting. 16. CLOCK button: